FRPshell
Water will not get in
A fibreglass composite shell, not veneer over ply, so there is nothing in it to absorb water, swell or delaminate along the bottom rail.
Drag sideways to turn · flick to spin
100%
Main door · FRP composite
Marvel Main Door
with M.S. Sheet
A steel sheet runs the full height of the leaf, inside a fibreglass shell that will not swell, warp or take termite. Built for entrances that stay shut.
- Leaf
- 40mm
- Frame
- 100×60mm
- Core
- M.S.sheet
- Max size
- 1300×2100mm
Drawings and spec sheet download without a form.
Why this doorset
A composite shell,
a steel spine.
Most main door failures in Indian conditions are moisture, insects and forced entry. Marvel is built against all three at once.
M.S.through core
Steel inside the leaf
A mild steel sheet runs through the core, so the leaf itself resists forcing rather than leaving the lock to do all the work.
40mm leaf
Nothing for termite to eat
The composite shell gives termite and fungus no cellulose to feed on, so there is no treatment cycle and no re-polishing.
670–1300mm
Made to the opening
Supplied as a complete doorset — leaf, frame and hardware together — between 670 and 1300 mm wide and up to 2100 mm high.
Specification
Everything on the drawing.
Full schedule below. If your consultant needs it in a different format, the DWG and spec sheet are further down the page.
- Design
- Marvel Main Door
- Shell
- FRP / GRP composite
- Core
- M.S. sheet through core
- Leaf thickness
- 40 mm
- Frame section
- 100 × 60 mm
- Maximum size
- 1300 × 2100 mm
- Minimum size
- 670 × 1770 mm
- Opening
- Entrance doors, security doors
- Hardware
- Lever handle, knocker, hinges, mortice lock
- Supplied as
- Complete doorset — leaf, frame, hardware
- Standard
- IS 14856 — FRP door shutters
Choosing a core
With the steel sheet,
or without.
Same shell, same finish, same frame. The difference is what sits inside the leaf.
| Compare | Marvel with M.S. sheet | New Marvel |
|---|---|---|
| Core | M.S. sheet through core | Composite, no M.S. sheet |
| Shutter thickness | 23–40 mm | 23–40 mm |
| Size range | 670 × 1770 – 1300 × 2100 mm | 670 × 1770 – 1300 × 2100 mm |
| Forced-entry resistance | Steel plate across the full leaf | Shell only |
| Weight | Heavier, from the steel | Lighter |
| Waterproof | Yes | Yes |
Documentation
No form in the way.
Specification, drawings and fixing details, straight down. Take what you need and speak to us when you are ready.
IS 14856FRP door shutters
670–1300 mmMade to your opening
DoorsetLeaf, frame and hardware together
Made in IndiaFimen Interior Solutions
Next step
Send us the opening size.
We will send back a price.
Give us the width, height and whether it is an external wall. You will get a quoted doorset, not a brochure.